14
KSTB2020
User Guide
Observation Things to Check Remediation
Video/audio quality is
poor on Set-Top Box
or network connection
error is displayed.
Wi-Fi signal strength in STB
Network connection menu.
Relocate router and STB
closer in proximity with each
other if possible, such that
signal is strong or very strong.
Connecting the STB to home
router with a CAT-5/5e/
cable will also resolve poor
Wi-Fi connectivity issues.
If video or audio quality
is still poor after network
remediation, contact
OptiLink technical support.
Ethernet cable integrity If wired Ethernet connectivity
is used, reset/replace
Ethernet cable as required.
Router integrity Power cycle STB and router.
HDMI/Analog composite
cable integrity and
connection
Reset/replace cables
as needed.
TV HDMI port integrity. Use dierent TV HDMI
port if possible.
If possible, compare
suspect STB A/V quality
to another STB or a retail
device (e.g. Amazon
Firestick or Roku)
If the STB is found to
show issues while no
other devices do, contact
OptiLink technical support.
Video is not visible
on the TV
HDMI port connection
is aligned with the TV's
HDMI port selection
Ensure HDMI port
connection and HDMI port
selection are the same.
Remote does not
control STB, TV, or
audio equipment.
Battery charge Replace batteries if
battery charge is low.
Remote not paired to
TV or Audio system
Refer to pages 8-9 for
remote pairing instructions.
TROUBLESHOOTING
Weak Wi-Fi signal
Medium Wi-Fi signal
Strong Wi-Fi signal
Very Strong Wi-Fi signal
To Next Page
Loading...
Need help?
General
