Kaptia Klever - User Manual

Questions and Answers

K
Krystal SmithAug 2, 2025
What to do if mobile app is not able to communicate with Kaptia Klever Network Hardware console?
- A
  Alexandria MartinezAug 2, 2025
  Ensure that the console is turned on and the Bluetooth Status Indicator is on.
J
Joshua WardAug 6, 2025
What to do if PC application is not able to communicate with Kaptia Network Hardware console?
- K
  Kari WallAug 6, 2025
  Check that the console is plugged into the PC, turned on, and that the Bluetooth Status Indicator is not turned on (either fixed or blinking).
M
Michelle SmithAug 10, 2025
Why Kaptia Network Hardware device does not turn on and the battery status LED blinks red and turns off?
- A
  Adam WatsonAug 10, 2025
  This usually happens because the battery is discharged. To solve this, charge the battery.
M
morenobriannaAug 14, 2025
What to do if Kaptia Network Hardware console doesn't detect the type of remote control connected?
- J
  Julie CoxAug 14, 2025
  If the application does not show it, avoid pushing any buttons on the remote control. Also, verify that the remote control has a battery with a good charge level.
M
michellerowlandAug 19, 2025
Why is the red LED flashing on my Kaptia Klever?
- D
  Daniel GomezAug 19, 2025
  A flashing red LED indicates that the battery is too low. You should charge the battery.
M
Marc MartinAug 23, 2025
Why doesn't the Kaptia Network Hardware console sound when analyzing an emitter?
- T
  Troy AustinAug 23, 2025
  Some remote control models cannot be analyzed, or their implementation prevents the console from emitting sound.
M
Michael HarmonAug 27, 2025
What does it mean if the Bluetooth® LED on Kaptia Klever Network Hardware does not blink regularly?
- V
  Veronica PughAug 27, 2025
  This indicates an error with the Bluetooth® radio. Please contact us.

Summary

Interface Panel Components

Battery Status Indicators

Indicates battery charge status (red for running, green for finished).

Power & Bluetooth Status Indicators

Shows device power status and Bluetooth link connectivity.

Bluetooth Enable Button

Controls the Bluetooth radio link, switching it on or off.

Connection Panel

Peripheral Connector

Connects the console to various peripherals using cable B.

USB PC Connector

Connects the console to a PC via USB cable A.

Connecting Devices

Connecting to a Windows PC

Steps to connect the Kaptia Klever console to a Windows PC via USB.

Connecting to an Android Device via Bluetooth

Steps to connect the Kaptia Klever console to an Android device via Bluetooth.

Operating Instructions

Analyzing Remote Control

Guide on positioning an emitter in the transmission area for correct reading.

Programming a Remote Control

Instructions for copying or generating new remote controls using the console.

Reading Memory

Procedure for reading memory using compatible readers plugged into the console.

The Kaptia Klever is an electronic system designed for analyzing, programming, and copying remote controls, as well as reading memory from various receivers. It offers connectivity options for both Windows-based PCs and Android mobile devices, providing a versatile platform for users in the electronic systems domain.

Function Description:

The primary function of the Kaptia Klever console is to interact with remote controls and receiver memories. It comprises two main parts: an interface panel and a transmission area. The interface panel allows users to switch the console on/off, manage the Bluetooth interface for mobile device connections, and monitor battery and link status through LED indicators. The transmission area is where the remote control to be analyzed is placed.

The device supports several key operations:

Analyzing Remote Controls: Users can place a remote control in the transmission area for analysis. The system is designed to read the remote control's data, although optimal reading might require slight adjustments to the remote's position within the area, especially for emitters with displaced antennas. The console provides visual feedback (On/Off Indicator flashing) to signal the start of the reading process.
Programming Remote Controls: After analysis, the Kaptia Klever allows users to either make a copy of the analyzed remote control or generate a new one. For EVO and MULTI models, this process is largely automatic, requiring the user to plug the remote into the console and follow on-screen instructions. For FF or FV models, user interaction is required to select the button or channel for code storage, guided by the application.
Reading Memory: The console can read data from various receiver memories. This is achieved by plugging a compatible memory reader (available for MutanCode®, JCM®, FLOR®, and ERREKA®) into the peripheral socket and following the application's instructions.
Firmware Updates: The Kaptia Klever console supports firmware updates to incorporate new versions and features. The updating process is indicated by blinking Battery Charge Status and Bluetooth Link Indicators. Users are strongly advised not to interrupt this process, which can only be performed from a PC.

Important Technical Specifications:

Dimensions: 160 x 98 x 32 mm
Weight: 340 g (including battery)
Battery: Li-Ion 3.7 V 3200 mAh
PC Communication Port: USB 2.0
Mobile Communication Port: Bluetooth 2.0
Frequency Counter Detection Range: 20 – 900 MHz
Firmware: Upgradable
Additional Features: Battery status indicator, Automatic switch-off system.
Operating Temperature: All technical characteristics refer to an ambient temperature of 20°C.

Usage Features:

Connectivity:
- Windows PC: Connects via USB. Requires plugging in a supplied USB memory (if available) to install software and device controllers, then connecting the console to the PC's USB port. The Bluetooth radio should be turned off for PC connection. The Kaptia Klever application needs to be launched, and users must sign in or sign up.
- Android Device: Connects via Bluetooth. Users must power on the console and enable the Bluetooth radio by pressing the Bluetooth button (indicated by a flashing blue LED). The Kaptia Klever App, downloaded from Google Play, will automatically find and link to the console, turning on the device's Bluetooth radio.
Interface Panel: Features LED indicators for:
- Battery Charge: Red for charging, green for fully charged.
- On/Off Status: Indicates if the device is on, with advanced functions detailed in the manual.
- Bluetooth Link: Flashing blue for enabled Bluetooth, solid blue for a linked device.
Pushbuttons:
- On/Off Pushbutton: To switch the console on and off.
- Bluetooth On/Off Enable Button: To switch the Bluetooth radio link on and off.
Connection Panel: Provides ports for:
- Peripheral Connector (B): For connecting various peripherals, such as memory readers.
- USB PC Connector (A): For connecting to a PC via a USB cable.
Application Guidance: The system guides users through operations with on-screen instructions, especially for programming and memory reading.

Maintenance Features:

Troubleshooting Guide: The manual includes a comprehensive troubleshooting table to help users resolve common malfunctions or errors, such as:
- Red LED flashes: Indicates low battery, requiring charging.
- Device doesn't turn on, Battery Status LED blinks red and turns off: Indicates a discharged battery, requiring charging.
- PC application unable to communicate: Check if the console is plugged into the PC, turned on, and if the Bluetooth Status Indicator is off (fixed or blinking).
- Mobile APP unable to communicate: Check if the console is turned on and the Bluetooth Status Indicator is on.
- Console unable to detect remote control type: Ensure no buttons are pushed on the remote unless prompted, and check the remote's battery status.
- Console does not sound during analysis: Some remote control models may not be analyzable or may not emit sound due to their implementation.
- Bluetooth LED blinks then stays off: Indicates an error with the Bluetooth radio, requiring contact with customer service.
Firmware Updates: Regular firmware updates ensure the console remains up-to-date with the latest features and improvements.
Warnings and Safety:
- Users must read the manual for safety information and proper installation.
- Only use peripherals designed for the console to prevent damage.
- Avoid modifying components unless specified in the manual.
- Do not switch off the console during operation.
- Dispose of packing materials according to local regulations.
- Contact Kaptia customer service for unresolved faults.
- The console has an automatic switch-off system, so users should verify it's on before launching the application.

The Kaptia Klever is designed to be a reliable and user-friendly tool for professionals working with electronic access control systems, offering robust functionality and clear guidance for operation and maintenance.

Kaptia Klever Specifications

General

Brand	Kaptia
Model	Klever
Category	Network Hardware
Language	English