12
d. Using the DOWN button Highlight the setting named
Motion Detection and push OK.
e. Using the UP and DOWN button, highlight the required
sensitivity of motion detection (The High setting will allow
small amounts of movement to trigger recording, and
Low will require a larger amounts of activity to trigger
recording).
f. To confirm selection push the OK button, the KPT-722 will
take you back to the VIDEO menu.
14. Video:
This is the default start up screen (on right) and is how all
recording is triggered.
From this screen you can manually start and stop recording using
the OK button. Footage can be manually locked by pressing the
PROTECT button, protecting it from being recorded over.
The UP button can be used in VIDEO mode to cycle through the
display modes. These modes change the displayed image on
the screen, giving the options front view only, rear view only, or
both together using ‘picture in picture’.
The Screen Saver can be turned on and off by pressing the
MODE button.
The Microphone’s mute function can be toggled with the DOWN
button.
The LED Lamps three modes can be cycled through using the
MENU Button.
When in VIDEO mode the PHOTO Button on the top of the KPT-
722 can be used to capture still images.
To Next Page
Loading...
