English 25
Subject to technical modifications.
Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Floor cleaning ride-on machine
Type: 1.246-xxx
Currently applicable EU Directives
2006/42/EC (+2009/127/EC)
2014/30/EU
2014/53/EU (TCU)
Harmonised standards used
EN 60335-1
EN 60335-2-29
EN 60335-2-72
EN 62233: 2008
EN 55012: 2007 + A1: 2009
EN 55014-1: 2006+A1: 2009+A2: 2011
EN 55014-2: 1997+A1: 2001+A2: 2008
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 61000-6-2: 2005
TCU
EN 301 511 V12.5.1
EN 300 440 V2.1.1
EN 300 328 V2.2.2
EN 300 330 V2.1.1
National standards used
-
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2021/03/01
We hereby declare that the product described below
complies with the relevant provisions of the following
UK Regulations, both in its basic design and construc-
tion as well as in the version put into circulation by us.
This declaration shall cease to be valid if the product is
modified without our prior approval.
Product: Floor cleaning ride-on machine
Type: 1.246-xxx
Currently applicable UK Regulations
S.I. 2008/1597 (as amended)
S.I. 2016/1091 (as amended)
S.I. 2017/1206 (as amended) (TCU)
Designated standards used
EN 60335-1
EN 60335-2-29
EN 60335-2-72
EN 62233: 2008
EN 55012: 2007 + A1: 2009
EN 55014-1: 2006+A1: 2009+A2: 2011
EN 55014-2: 1997+A1: 2001+A2: 2008
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 61000-6-2: 2005
TCU
EN 301 511 V12.5.1
EN 300 440 V2.1.1
EN 300 328 V2.2.2
EN 300 330 V2.1.1
National standards used
-
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2021/03/01
Suction turbine power W 750 750 750 750 750
Brush drive power W 2 x 600 2 x 600 2 x 750 2 x 600 2 x 600
Degree of protection IPX3 IPX3 IPX3 IPX3 IPX3
Vacuuming
Suction performance, air quantity l/s 27,3 27,3 27,3 27,3 27,3
Vacuum (max.) kPa (mbar) 21,1 (211) 21,1 (211) 21,1 (211) 21,1 (211) 21,1 (211)
Cleaning brushes
Brush diameter mm 105 410 105 450 550
Brush length mm 700 - 800 - -
Brush speed 1/min 1200 180 1200 180 180
Side scrubbing deck brush diameter mm - - 220 220 -
Side scrubbing deck brush speed 1/min - - 210 210 -
Internal charger
Nominal voltage V 230 230 230 230 230
Frequency Hz 50-60 50-60 50-60 50-60 50-60
Current consumption A 8 8 8 8 8
Ambient conditions
Permissible temperature range °C 5...40 5...40 5...40 5...40 5...40
Water temperature max. °C 50 50 50 50 50
Filling system water pressure (Option) MPa (bar) 1 (10) 1 (10) 1 (10) 1 (10) 1 (10)
Waste water tank flushing system water pressure (option) MPa (bar) 1 (10) 1 (10) 1 (10) 1 (10) 1 (10)
Relative humidity % 20...90 20...90 20...90 20...90 20...90
Incline
Max. working area slope (Adv) % 10 (15) 10 (15) 10 (15) 10 (15) 10 (15)
Determined values in acc. with EN 60335-2-72
Hand-arm vibration value m/s
2
<2,5 <2,5 <2,5 <2,5 <2,5
Seat vibration value m/s
2
<2,5 <2,5 <2,5 <2,5 <2,5
Uncertainty K dB(A) 0,1 0,1 0,1 0,1 0,1
Sound level L
pA
normal operation dB(A) 67 67 67 67 67
Uncertainty K
pA
dB(A)22222
Sound power level L
WA
+ Uncertainty K
WA
normal opera-
tion
dB(A)8585858585
Side scrubbing deck
Power W--140140-
Brush contact force, max. N (kg) - - 88 (9) 88 (9) -
Brush contact pressure, max. N / m
2
(g /
cm
2
)
- - 2943 (30) 2943 (30) -
R 75 D 75 R 85 D 90 D 110
EU Declaration of Conformity
Declaration of Conformity (UK)
To Previous Page
Loading...
