Kärcher Chariot 2 iVac 24 ATV User Manual (English)

Questions and Answers:

V
vaughnvanessaAug 19, 2025
Why is my Kärcher Vacuum Cleaner's performance so poor?
- J
  Jack SmithAug 19, 2025
  Poor vacuum performance in your Kärcher Vacuum Cleaner can stem from several causes. Debris might be caught in the system, so remove any obstructions. Ensure the lid is correctly closed and latched. The accessory hose should be tightly sealed in the hose holder. Also, a low battery charge can affect performance, so charge the batteries. Other potential issues include full bag or debris tray (empty them), faulty gaskets (inspect and replace), or a vacuum diverter valve that is not actuating (check for debris). Finally, check electrical connections and the timer circuit board.
S
Sheryl EvansAug 21, 2025
What to do if my Kärcher Chariot 2 iVac 24 ATV has no power?
- T
  toddlyonsAug 21, 2025
  If your Kärcher Vacuum Cleaner has no power, begin by checking all battery cable connections. Ensure the batteries are plugged in. If the emergency shut-off is activated, reset it. Also, unplug the on-board charger and stow the cord. Corroded battery cables can also be the cause, so clean the connections. If none of these steps work, the key switch might be faulty and require replacement.
U
uandrewsAug 23, 2025
Why is the battery indicator light flashing on my Kärcher Chariot 2 iVac 24 ATV?
- W
  wthorntonAug 23, 2025
  A flashing battery indicator light on your Kärcher Vacuum Cleaner usually means that the battery needs to be charged, so charge the battery. Alternatively, the controller may be indicating a fault code; refer to the fault code table for further information.
J
James ChaseAug 26, 2025
What to do if the vacuum and brush do not turn on in my Kärcher Chariot 2 iVac 24 ATV?
- S
  Sophia McclainAug 26, 2025
  If the vacuum and brush on your Kärcher Vacuum Cleaner do not turn on, the circuit breaker might have tripped, so reset it. Also, check for a full bag or clogs in the system, indicated by the bag full light. If so, replace the bag, empty the debris tray, and remove any clogs.
S
Steven GutierrezAug 30, 2025
What causes the vacuum motor in my Kärcher Chariot 2 iVac 24 ATV Vacuum Cleaner to not run or run slowly?
- K
  Kevin GonzalezAug 30, 2025
  If the vacuum motor in your Kärcher Vacuum Cleaner doesn't run or runs slowly, a faulty vacuum circuit or switch could be the cause, so check the wires and connections. Worn vacuum motor brushes can also be responsible; replace the brushes and check the commutator. Additionally, the vacuum circuit breaker might have tripped, so reset it.
H
hessjamieSep 2, 2025
Why are the brush motors not running or running slowly on my Kärcher Vacuum Cleaner?
- C
  Cody DunnSep 2, 2025
  If the brush motors on your Kärcher Vacuum Cleaner are not running or running slowly, the circuit breaker might have tripped, so reset it. Also, ensure the battery is sufficiently charged. A faulty brush circuit or motor could be the problem; check the wires, connections, and motor. If the bag full light is on, replace the bag, empty the debris tray, or remove any clogs. Lastly, worn brush motor brushes can cause this issue, so replace the brushes and check the commutator.
E
Eric NielsenSep 4, 2025
How to fix a Kärcher Vacuum Cleaner that does not change speeds?
- M
  Michael TylerSep 4, 2025
  If your Kärcher Vacuum Cleaner does not change speeds, the issue might stem from a faulty speed control circuit or switch. Check the wires and connections to resolve this.
A
Alexander BryanSep 6, 2025
What causes my Kärcher Vacuum Cleaner to only have forward or reverse speed?
- B
  brianmillerSep 6, 2025
  If your Kärcher Vacuum Cleaner only has forward or reverse speed, it could be due to a faulty forward/reverse circuit. Check the wires and connections.
M
Michelle SmithSep 8, 2025
What to do if my Kärcher Chariot 2 iVac 24 ATV Vacuum Cleaner has no machine function?
- D
  Dana LarsonSep 8, 2025
  If your Kärcher Vacuum Cleaner has no machine function, the console lid might be open. Close the console lid to resolve this.
J
Jessica PerkinsSep 12, 2025
Why won't the deck go down on my Kärcher Chariot 2 iVac 24 ATV?
- S
  Stacey LeSep 12, 2025
  If the deck won't go down on your Kärcher Vacuum Cleaner, the actuator circuit breaker might have tripped. Reset the actuator circuit breaker.

Kärcher Chariot 2 iVac 24 ATV Specifications

General

Brand	Kärcher
Model	Chariot 2 iVac 24 ATV
Category	Vacuum Cleaner
Language	English

Summary

Machine Data Label and Overview

Overview

Provides a general description of the Chariot iVacuum 24 ATV and its intended use.

Warranty Registration

Instructions and a web link for registering the product to receive benefits.

How To Use This Manual

Safety Section Reference

Directs users to the safety section for important hazard and precaution information.

Operations Section Reference

Directs users to the operations section for details on machine function and use.

Maintenance Section Reference

Directs users to the maintenance section for upkeep and service procedures.

Safety

Important Safety Instructions

Critical precautions for safe operation, covering fire, shock, and injury risks.

Hazard Intensity Level

Defines hazard symbols (WARNING, CAUTION) and their corresponding risk levels.

Safety Label Locations

Illustrates the placement of essential safety labels on the machine.

Operations

Technical Specifications

Detailed technical data including dimensions, power ratings, and performance metrics.

Operational Safety Precautions

Important cautions regarding machine operation, especially concerning children.

How This Machine Works

Explains the fundamental systems (brush, vacuum, control) and functions of the machine.

Machine Components

Identifies and labels the main parts and components of the machine.

Drive Controls Overview

Illustrates the location of various drive control elements on the machine.

Key Switch and Emergency Stop

Explains the function of the key switch for power and the emergency stop button.

Throttle, Horn, Steering, and Speed Controls

Describes the operation of the throttle pedal, horn button, steering wheel, and speed control.

Battery Indicator and Hour Meter

Explains the battery discharge indicator lights and the hour meter function.

Vacuum Controls and Bag Status

Details function modes for vacuuming and the vacuum bag status light indicator.

Pre-run Inspection and Starting

Steps for pre-operation checks and safely starting the machine.

Emergency Stop Procedures

Actions to take for emergency stops, including power shutoff and brake engagement.

Vacuuming Operations

Guidance on normal vacuuming patterns and the steps to begin vacuuming.

Stopping and Bag Changing

Procedures for safely stopping the machine and changing the disposable vacuum bag.

Maintenance

Service Schedule

Routine maintenance tasks and recommended intervals for keeping the machine in good condition.

Battery Components Identification

Illustrates and labels the parts related to the machine's battery system.

Wet Cell Battery Maintenance

Specific maintenance guidelines and precautions for wet cell batteries.

General Battery Maintenance and Safety

General procedures and safety precautions for battery upkeep and handling.

Checking Battery Specific Gravity

Method for checking battery charge level using a hydrometer and temperature correction.

Charging Batteries

Detailed instructions and safety warnings for charging the machine's batteries.

Changing Batteries

Procedure for safely removing and installing the machine's batteries.

Delta Q IC650 Charger Maintenance

Maintenance requirements and guidelines for the Delta Q IC650 battery charger.

Delta Q IC650 Charger Operation

Instructions for operating the Delta Q IC650 charger and understanding its indicators.

Selecting a Charge Profile

Steps to select and confirm a battery charging profile on the charger.

Configuring Charger via USB

Using a USB flash drive to configure the IC650 charger settings and update software.

Charger Troubleshooting and Software Updates

Basic troubleshooting for charger issues and confirming software updates.

Retrieving Charge Tracking Data

Procedure for downloading charge data from the charger using a USB drive.

Circuit Protection Details

Information on circuit breakers and fuses for electrical protection in the machine.

Vacuum Diverter Valve Maintenance

Steps for maintaining and removing the vacuum diverter valve.

Brush Deck Components

Identifies and labels the parts of the brush deck assembly.

Brush Deck Operations and Maintenance

Explains brush deck operation, brush/tray maintenance, and belt replacement.

Belt Replacement

Steps for replacing the drive belt on the brush deck.

Brush Motor Carbon Brush Replacement

Guide for replacing carbon brushes in brush motors.

Brush Deck Motor & Coupler Replacement

Procedures for replacing the brush deck motor and coupler spider.

Vacuum Motor Replacement

Steps for removing and replacing the vacuum motor.

Vacuum Motor Carbon Brushes

Information on vacuum motor carbon brushes and their replacement.

Drive Motor Carbon Brush Replacement

Guide for replacing carbon brushes in drive motors.

Drive Chain Tension & Transport

Instructions for adjusting drive chain tension and transporting the machine.

Brake Override Procedure

Steps to disengage the brake for manual movement of the machine.

Incline Operation Caution

Warning regarding potential overheating when operating on inclines.

Drive Motor Brush Replacement (Serial Specific)

Specific instructions for drive motor brush replacement based on serial number.

Drive Chain Tension & Lever Access

Adjusting drive chain tension and accessing the drive gear lever.

Lever Access for Drive Gear Engagement

Details on accessing and operating the drive gear lever for engagement.

Incline Operation Warning

Warning about potential overheating when navigating inclines.

Machine Tie-Down Points for Transport

Recommended points and methods for securing the machine during transport.

Troubleshooting

Power and Propel Issues

Solutions for problems with machine power, starting, and propulsion.

Speed Control and Direction Problems

Diagnosing and fixing issues with machine speed and directional control.

Vacuum and Brush Motor Issues

Troubleshooting for vacuum motor, brush motor, and system startup problems.

Vacuum Performance and Deck/Broom Problems

Addressing poor vacuum performance and issues with deck or broom operation.

Battery Indicator Faults

Interpreting and resolving battery discharge indicator warnings and faults.

Suggested Spare Parts

Brush Deck and Brush Sets

Lists part numbers for brush deck brushes and side brooms.

Filters, Bags, and Motors

Lists part numbers for filters, vacuum bags, motors, belts, and wheels.

Related product manuals

Kärcher WINDSOR Chariot 3

49 pages

Chariot CV 60/1 RS KIRA Autonomous

Kärcher NT 65/2 Tact2

36 pages

Kärcher KNT 2 Premium

18 pages

Kärcher Chariot 2 iVac 24 ATV User Manual

Table of Contents

Questions and Answers:

Kärcher Chariot 2 iVac 24 ATV Specifications

Summary

Machine Data Label and Overview

Overview

Warranty Registration

How To Use This Manual

Safety Section Reference

Operations Section Reference

Maintenance Section Reference

Safety

Important Safety Instructions

Hazard Intensity Level

Safety Label Locations

Operations

Technical Specifications

Operational Safety Precautions

How This Machine Works

Machine Components

Drive Controls Overview

Key Switch and Emergency Stop

Throttle, Horn, Steering, and Speed Controls

Battery Indicator and Hour Meter

Vacuum Controls and Bag Status

Pre-run Inspection and Starting

Emergency Stop Procedures

Vacuuming Operations

Stopping and Bag Changing

Maintenance

Service Schedule

Battery Components Identification

Wet Cell Battery Maintenance

General Battery Maintenance and Safety

Checking Battery Specific Gravity

Charging Batteries

Changing Batteries

Delta Q IC650 Charger Maintenance

Delta Q IC650 Charger Operation

Selecting a Charge Profile

Configuring Charger via USB

Charger Troubleshooting and Software Updates

Retrieving Charge Tracking Data

Circuit Protection Details

Vacuum Diverter Valve Maintenance

Brush Deck Components

Brush Deck Operations and Maintenance

Belt Replacement

Brush Motor Carbon Brush Replacement

Brush Deck Motor & Coupler Replacement

Vacuum Motor Replacement

Vacuum Motor Carbon Brushes

Drive Motor Carbon Brush Replacement

Drive Chain Tension & Transport

Brake Override Procedure

Incline Operation Caution

Drive Motor Brush Replacement (Serial Specific)

Drive Chain Tension & Lever Access

Lever Access for Drive Gear Engagement

Incline Operation Warning

Machine Tie-Down Points for Transport

Troubleshooting

Power and Propel Issues

Speed Control and Direction Problems

Vacuum and Brush Motor Issues

Vacuum Performance and Deck/Broom Problems

Battery Indicator Faults

Suggested Spare Parts

Brush Deck and Brush Sets

Filters, Bags, and Motors

Related product manuals