29
Always use the high pressure washer below the rated fluid pressure of the high
pressure washer. Never operate the high pressure washer without a water supply.
Operating the unit without water supply will cause irreparable damage to the
unit.
1.
Make sure the water supply point you use for the high-pressure washer is free
of dirt, dust, and does not contain corrosive chemicals. Using a dirty water
supply point will compromise the life of the high pressure washer.
2.
ATTENTION ‒ The high pressure washer can be used for various applications
such as washing cars, garages, etc., when high pressure is required to remove
dirt and debris.
High pressure water flow can damage your work surface if not used
correctly!
See the section titled “STARTING INTO OPERATION” for more details.
3.
NEVER move the unit by pulling on the high pressure hose. Use the handle
located on the top of the product.
4.
Always hold the high pressure gun and lance with both hands. Keep one hand
on the gun/trigger while holding the spear with the other (see pictures).
5.
When spraying detergent, the high-pressure washer applies detergent to the area
to be cleaned only at low pressure. After applying detergent, remove it by
spraying it outside the work area using the adjustable nozzle.
6.
THIS UNIT IS DESIGNED TO BE USED WITH COLD WATER ONLY!
DO NOT USE HOT WATER WITH THIS HIGH PRESSURE WASHER.
CORRECT USE OF THE HIGH PRESSURE WASHER
To Next Page
Loading...
