To Next Page
C
Cassie WarrenAug 14, 2025
Why are the brushes in my Kärcher CV 36/2 Pressure Washer brush head not rotating, but the suction turbine is running?
- RRyan MillsAug 14, 2025
If the brushes in the brush head of your Kärcher Pressure Washer are not rotating, but the suction turbine is running, it could be that the hand pipe is not correctly inserted into the motor casing or is worn out. Ensure the hand pipe is inserted vertically into the motor casing. If the pipe end is worn out, especially from use without the joint or upholstery nozzle, the end switch may not activate, preventing the brushes from rotating. In this case, replace the hand pipe.
General
