HD 1050 Trouble shooting
19
5. Oil leakage from housing
5.1 Oil drain plug leaking
Unscrew the oil drain plug and drain the oil into
a suitable container.
Replace the seal ring.
Screw in the oil drain plug and tighten with a
torque of 45 Nm.
Caution: Fill with correct oil (see technical
data).
5.2 Piston seals and housing seal leaking
Unsrew the housing fastening srews and replace
them with the assembly srews (special tools).
Drain the oil.
Remove the cylinder head completely.
Caution: Loosen the assembly screws evenly
as you draw off the housing. Take care not to tilt
it.
To Next Page
Loading...
