Why does the output pressure of my Kärcher Pressure Washer vary?
- JjordantammyJul 29, 2025
If the output pressure of your Kärcher Pressure Washer is fluctuating, ensure the water is turned on full force and inspect the garden hose for kinks, leaks, or blockages. Check that hoses and fittings are airtight. Turn off the machine and purge the pump by squeezing the trigger gun until a steady water flow emerges through the nozzle. Remove and rinse the water inlet filter in warm water. Clear any obstructions from the discharge nozzle using a fine needle. For calcified components, run distilled vinegar through the detergent suction tube.