Kärcher Puzzi 8/1 User Manual

10 English
6. Let the device dry thoroughly: Re-
move the cover or move it to the
side.
Storing the device
1. Wind the mains cable around the
carrying handle of the device and
the cover.
Illustration C
2. Store the device in a dry room and
secure it against unauthorised use.
Cleaning methods
Normal soiling
1. Spray and vacuum up the cleaning
solution in one step.
Note
Repeated vacuuming without spraying
shortens the drying time.
Heavily soiling or stains
1. Apply cleaning solution with the suc-
tion turbine switched off and let it
work for 10 to 15 minutes.
2. Clean the area as with normal soil-
ing.
Upholstery cleaning
1. Use less detergent for sensitive fab-
rics and spray the surface at a dis-
tance of approx. 7.9 in (200 mm).
Then only vacuum.
Cleaning tips
● Spray heavily soiled areas in ad-
vance and allow the cleaning solu-
tion to work for 5 to 10 minutes.
● Always work from light to shadow
(from window to door).
● Always work from the cleaned to the
uncleaned area.
● The more sensitive the covering (ori-
ental bridges, Berber, upholstery
fabric) the lower the concentration of
detergent.
● Carpets with jute backs can shrink
and bleed in colour if the work is too
wet.
● Brush wet pile carpets in the direc-
tion of the pile after cleaning when
wet (e.g. with a fibre brush or scrub-
ber).
● Impregnating after wet cleaning pre-
vents the textile from being quickly
soiled again.
● To avoid pressure points or rust
stains, do not walk on or furnish the
cleaned area until after it has fully
dried.
● To improve the cleaning result, rinse
the object with clean water after us-
ing detergents.
Detergent
Descrip-
tion
Name Dosing Order
number
CarpetPro
cleaner (1.8
lbs/0.8 kg)
RM 760
powder
1% 6.295-
849.0
CarpetPro
cleaner,
iCapsol (16
piece)
RM 760
tabs
2 tabs
for 2.1
gal (8 li-
tres)
6.295-
850.0
CarpetPro
cleaner,
quick-dry-
ing (2.6 gal/
10 litres)
RM 767
liquid
1.2% 6.295-
198.0
CarpetPro
cleaner (2.6
gal/10 litres)
RM 764
liquid
1% 6.295-
854.0
CarpetPro
impregna-
tion (1.3 gal/
5 litres)
RM 762
liquid
20% 6.295-
852.0
Defoaming
(0.7 gal/2.5
litres)
RM 761
liquid
0.5% 6.291-
389.0

Kärcher Puzzi 8/1 Specifications

General

Power source	AC
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Maximum input power	1200 W
Annual energy consumption	- kWh
Type	Drum vacuum
Hose length	2.5 m
Cleaning type	Wet
Dust capacity	- L
Product color	Black, Grey, Yellow
Dust container type	Bagless
Liquid tank capacity	8 L
Airflow	71 l/s
Proper use	Professional
Noise level	- dB
Cleaning surfaces	Carpet, Hard floor
Vacuum air filtering	Water
Dirt separating method	-
Cord length	7.5 m
Crevice tool	Yes
Vacuum brushes included	Hard floor brush

Weight and Dimensions

Depth	524 mm
Width	332 mm
Height	442 mm
Package weight	11400 g
Weight (without accessories)	8600 g