EasyManuals Logo

Kärcher Puzzi 8/1 User Manual

Kärcher Puzzi 8/1
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8English
9 Steering roller
10 Spray hose connection
11 Suction hose connection
12 Cover
13 Fresh water tank
14 Device carrying handle
15 Nozzle mouthpiece (red)
16 Union nut
17 Lever on the upholstery nozzle
18 Spray hose
19 Suction hose
20 Spray / suction hose
21 Quick Start Guide
22 Wastewater container, removable
23 Wastewater container carrying han-
dle
24 Cover seal
25 Fluff filter
26 Fresh water filter
Table of nozzle mouthpieces
Start-up
1. Check the power cord, extension ca-
ble and hoses for damage before
each start-up.
Installing accessories
1. Connect the suction hose to the suc-
tion hose connection on the device.
Insert the spray hose coupling into
the spray hose connection on the
device and latch into place.
2. Connect the suction hose to the up-
holstery nozzle. Connect the spray
hose coupling to the upholstery noz-
zle and latch into place.
Mixing the cleaning solution
DANGER
Danger from detergents
Risk of injury and damage
Observe all instructions that are includ-
ed with the detergents used.
Note
Warm water (maximum 122 °F/50 °C)
increases the cleaning effect. Check
the temperature resistance of the sur-
face to be cleaned.
Note
Use detergents sparingly to conserve
the environment.
1. Mix fresh water and detergent in a
clean container (concentration as
specified for the detergent). Dis-
solve the detergent in the water.
Filling the fresh water tank
1. Pour the cleaning solution into the
fresh water tank. The filling level
must not exceed the "MAX" mark.
Defoaming agent
Note
Foam is generated in the wastewater
container when cleaning previously
shampooed carpets. Foaming can be
prevented by adding defoaming agents.
Col-
our
Part
num-
ber
Flow
vol-
ume
Appli-
cation
Ap-
proved
for de-
vice
Yel-
low
6.415-
165.0
0.53
gal/min
(2.0 l/h)
Floor
nozzle
Puzzi 10/
2
Green 6.415-
105.0
0.18
gal/min
(0.7 l/h)
Floor
nozzle
Puzzi 8/
1, Puzzi
9/1 Bp
Brown 6.415-
166.0
0.26
gal/min
(1.0 l/h)
Floor
nozzle
Puzzi 8/
1, Puzzi
10/1
Blue 6.415-
928.0
0.26
gal/min
(1.0 l/h)
Uphol-
stery
nozzle
Puzzi 8/
1, Puzzi
10/1,
Puzzi 10/
2, Puzzi
30/4
Red 6.415-
097.0
0.15
gal/min
(0.55
l/h)
Uphol-
stery
noz-
zle,
short
Puzzi 8/
1, Puzzi
9/1 Bp

Other manuals for Kärcher Puzzi 8/1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kärcher Puzzi 8/1 and is the answer not in the manual?

Kärcher Puzzi 8/1 Specifications

General IconGeneral
Power sourceAC
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Maximum input power1200 W
Annual energy consumption- kWh
TypeDrum vacuum
Hose length2.5 m
Cleaning typeWet
Dust capacity- L
Product colorBlack, Grey, Yellow
Dust container typeBagless
Liquid tank capacity8 L
Airflow71 l/s
Proper useProfessional
Noise level- dB
Cleaning surfacesCarpet, Hard floor
Vacuum air filteringWater
Dirt separating method-
Cord length7.5 m
Crevice toolYes
Vacuum brushes includedHard floor brush
Weight and Dimensions IconWeight and Dimensions
Depth524 mm
Width332 mm
Height442 mm
Package weight11400 g
Weight (without accessories)8600 g

Related product manuals