EasyManuals Logo

Kärcher SC 1.020 Quick Reference

Kärcher SC 1.020
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
– 8
Illustrations on fold-out
page!
Illustration
Insert steering roller and transport
wheels and lock them.
Illustration +
Connect the required accessories (see
Chapter "How to use the accessories“)
to the steam gun. Insert the open end of
the accessory on the steam gun and
push onto the steam gun until the un-
locking button of the steam gun locks
into place.
Illustration
Use the extension tubes if necessary.
To do so, connect one or both exten-
sion tubes to the steam gun. Insert the
required accessories on the free end of
the extension tube.
Danger
Hot water may drip out of the accessory
parts while you are detaching them! Never
detach accessory parts while steam
streams out - risk of scalding!
Move the selector switch for the steam
volume back (steam lever locked).
Illustration
To detach the accessory parts, press
the unlocking button and pull the items
apart.
Note: If you always use usual commercial
distilled water it is not necessary to descale
the boiler.
Caution
Do not use condensation water from the
drier!
Do not fill in detergents or other additives!
Remove the safety cap from the device.
Completely empty the steam boiler to
remove existing water (see fig. ).
Fill the boiler with a maximum of 1 liters
of fresh tap water.
Note: You can cut down the heating-up
time by using warm water.
Screw the safety cap back onto the de-
vice.
Place the unit securely on a firm sur-
face.
Caution
The appliance must not be carried during
cleaning.
Insert the mains plug into a socket.
Press the ON switch to turn on the ap-
pliance.
Both indicator lamps must illuminate.
Caution
Do not turn the appliance on without water
in the boiler. Otherwise, the appliance may
overheat (see Help with faults).
The orange indicator lamp goes out af-
ter approximately 8 minutes.
The steam cleaner is ready to use.
Operation
Attaching the Accessories
Removing the Accessories
Fill up with water
Turning on the Appliance
16 EN

Other manuals for Kärcher SC 1.020

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kärcher SC 1.020 and is the answer not in the manual?

Kärcher SC 1.020 Specifications

General IconGeneral
TypeCylinder steam cleaner
Capacity1 L
Cord length4 m
Product colorBlack, Yellow
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Ready time8 min
Steam pressure3.2 bar
Hard floor brushYes
Weight and Dimensions IconWeight and Dimensions
Depth380 mm
Width254 mm
Height260 mm
Weight3000 g

Related product manuals