NT30D Technical Reference and User Guide
29
GENERAL
Headset
Activate: By this option Headset is activated.
Deactivate: By this option Headset activation is cancelled.
When the headset is active, the telephone is picked up through the headset while it is on
hook by pressing the ‘Handset / Headset ’ key. If the handset is lifted up during the
conversation with headset, voice is divided into two, so volume decreases.
NOTE: In order to facilitate the headset utilization “Call Answer” can be selected as
‘Automatic’.
My Shortcuts
Thanks to this feature, you can program most frequently used NT30D menus to the 6
shortcut keys on the right of the screen.
Define Menu Shortcut: Any of the listed menus can be programmed to the one of the
shortcut keys. If a menu is assigned to any shortcut key before, it is not shown on the list.
(If this menu is wanted to be assigned to another shortcut key, first the existing assignment
must be deleted, then the new assignment should be done.)
Delete Shortcut: By this option any of the key assignments can be deleted.
Function Key: One of the features listed can be assigned to the ‘FUNCTION’ key on the
phone, by this option. Thus, the features can be activated / deactivated by using a single
key only. The features can be assigned to ‘FUNCTION’ key are as follows:
− <Empty> (appears if there is a function assigned before.)
− Enblock
− Hide My Number
− COLR
− Do Not Disturb
− On Line
− Background Music
− Key Sound
− Night Mode (appears only in the operator phone)
NOTE:
• The existing assignments of the shortcut keys can be seen through the ‘My Shortcuts’
list on the screen by using ‘OK’ key.
• During the assignment, any shortcut key selection can not be done. The assignments
are made, respectively, starting from the one at the bottom.
To Next Page
Loading...