42
(Phone Book)
The mobile phones -if they have permissions- can access to the registered GSM phone
book by this menu. There are two submenus: ‘Phone Memory’ and ‘SIM Memory’.
When one of the submenus is selected, the user will be prompted to enter a group of
letters. The phone book entries, which are beginning with this group of letters, will be
presented in a list.
“Select” key provides following options with these entries:
¨ By Make UPN Call option, number can be called through exchange.
¨ By Make BT Call option, number can be called through the active GSM device.
¨ Save; This menu is presented when the phonebook item is not recorded in the
ST30 phone book. By entering a name, number can be stored into the ST30 phone
book.
NOTE:
The GSM phone book accessing applications can differ from model to model (and also
their supported features). The presentation of this menu appears at the initial
communication between ST30 and the mobile phone, and depends on the allowed
compatibility feature of the phone book. In the same way, when a group of letters is
entered to search in phone or sim card memory, the uppercase/lowercase sensitivity
depends on connected GSM device compatibility too.
PAIRING A BLUETOOTH DEVICE
1. Activate bluetooth option by using MENU> BLUETOOTH > STATUS menu.
2. Use MENU > BLUETOOTH > SEARCH menu for new device searching.
Matching devices are listed on the screen. Scroll to the desired name by
navigation keys.
3. Enter the pairing password and save it.
4. If the bluetooth device is a GSM, the connection requirement is sent to the
GSM device and the connection is established if the GSM user approves.
NOTE:
If the connection is done successfully “Connected“ message is presented on the
screen. If it is not done successfully “Error “ message is presented.
To Next Page
Loading...