30
VEHICLE INTERIOR
Your vehicle is equipped with head restraint
which is vertically adjustable. The purpose of
this head restraint is to limit head motion in the
event of a collision.
To properly adjust your head restraint, lift it so
that it is located directly behind your head or as
close to that position as possible. This position
reduces the chance of a neck injury in a crash.
The head restraint locks into place when raised.
To release the head restraint and lower it, press
the tab located on the top of the seat back.
1.
Lift the lever to slide the seat forward and
backward.
2. Lift the lever to raise / lower the front side
of the seat
3.
Lift the lever to raise / lower the backside
of the seat
4.
Lift the lever to control the angle of the seat
back.
3.1 Driver’s Seat
Seating & Safety Restraints
Adjusting Position Head Restraint
WARNING
• Never try to adjust the driver’s seat, seat
back or head restraint when vehicle is
moving.
Lift the lever to slide the seat forward and
backward. Release the lever when the seat is at
appropriate position.
Forward & Backward
To Next Page
