EasyManua.ls Logo

Karsan Jest - Tyres; Tyre Specifications; Tyre Sizes; Tyre Pressures

Karsan Jest
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
TYRES & RIMS
Your new vehicle comes with high-quality tyres
made by a leading tyre manufacturer. If you ever
have questions about your tyre warranty and
where to obtain service contact with your dealer.
Tyre sizes are mentioned on the tyre.
Tyre pressure affects the traction control directly.
The pressure of the front and rear tyres should
be adjusted as 70 PSi or 4.75 bar (cold).
215 Section Width (mm)
75 Section Height / Width Ratio (%)
R Radial Ply
16 Tyre Rim Diameter (inch)
1150 Max. Load Capacity (kg)
70 Tyre Pressure (PSi)
Technical Specications
Choosing the proper tyre
4.1 Tyre Specications 4.1.1 Tyre Sizes 4.1.2 Tyre Pressures
Tyres
WARNING
•
Overloading your tyres can cause
overheating as a result of too much
friction. You could have an air-out and a
serious accident.
•
Under-inated tyres pose the same
danger as overloaded tyres. The resulting
accident could cause serious injury.
•
Check all tyres frequently to maintain the
recommended pressure. TYre pressure
should be checked when your tyres are
cold. “Cold” means your vehicle has been
sitting for at least three hours or driven
no more than 2 km.
•
Be sure to put the valve caps back on the
valve stems. They help prevent leaks by
keeping out dirt and moisture.
WARNING
During tyre replacement,ensure to use the
same type,size and even same brand tyres to
keep the performance stable.

Table of Contents