61
MAINTENANCE INFORMATION
•
Do not use hard brushes to clean the outside
of the vehicle.
•
Prior to wash the vehicle,ensure that the
engine is stopped and the transmission cools
down.
•
Cleaning the engine compartment and
insulation side should be done by authorized
KARSAN service stations.
•
To clean the plastic surfaces do not use
solutions which are reacting with plastics.
•
Cleaning the headlights should be done by
authorized KARSAN service stations.
•
For the non-metallic surfaces do not use
corrosive solutions or cleaning agents.
• Cleaning the electrical parts should be done
by authorized KARSAN service stations.
•
To clean the electronic display panel and
the buttons, do not use corrosive cleaning
agents and detergents.
•
To clean the dashboard,mats and cloth
covers,use vacuum cleaner and / or warm
water with soap.
Corrosion may occurs on metallic
surfaces,mechanical parts or connections.
How can it be determined?
Color change and corrosion on the outside of the
metallic surface may cause rust. Corrosion color
on metals is brown and on aluminum and zinc
parts it is white.
6.7 Vehicle Outside Cleanness 6.8 Vehicle Inside Cleanness 6.9 Corrosion Protection
Cleaning
General Information General Information General Information
INFORMATION
•
To clean safety belts,only use soap and
water. Do not use chemical agents.
•
Do not harm to the buckles and do not
bend them.
To Next Page
