CONTENTS: Page
Introduction - 2
1 Important Notes - 2
2 Operator Guide
2.1 Power Up - 3
2.2 Selecting End Feeders - 4
2.3 OMR Enable Setup - 5
2.4 System Setup - 6
2.5 Post Batch Setup - 7
2.6 Overhead Feeder Folder - 8
2.7 Test Mode - 9
2.8 System Status - 12
2.9 Operators’ Screen - 13
2.10 Data Log Control - 14
2.11 Clearing Machine - 15
2.12 Operator Help Pages - 17
2.13 Warning Pages - 19
3 Operator Adjustments
3.1 Feed Gate Setting - 21
3.2 Side Feeder Operations - 22
3.3 End Feeder Operations - 24
4 HS565 Sealer
4.1 Description - 25
4.2 Operator Adjustments - 25
5 Specifications - 28
6 Fold Options - 29
To Next Page
Loading...