Setting Rim Sensitivity on Pads
Making the Settings for Pads
18
Curve4, 5:
Curve6:
Compared to Curve1, a soft playing produces a
greater change.
Very little dynamic response, making it easy to
maintain strong volume levels. If using drum
triggers, these settings help maintain stable levels.
You can only set rim sensitivity on Snare, Tom1, Tom2, Tom3,
Tom4. If you select the other pads, this page will not appear.
Press the [PAGE] or [UTILITY] button, select Pad Rim
Sensitivity page. The display will show:
Same as the basic sensitivity feature, except that it relates
specifically to playing the rim.
Note:
This parameter can be adjusted only on SNARE, TOM1,
TOM2, TOM3, TOM4. If you select the other pads on this page,
a horizontal line "---" appears, and you can't make the setting.
UTILITY
TEMPO
BEAT
UTILITY
Curve 1 Curve 2
Curve 3
Curve 4
Loudness
Striking Force
Curve 5
Loudness
Striking Force
Curve 6
Loudness
Striking Force
Adjusting the Hi-Hat Pedal Splash Sensitivity
Saving Settings of Pads
1.
2.
Press the [PAGE] or [UTILITY] button, select Pedal Splash
Sensitivity page. The display will show:
This Setting controls the sensitivity of the foot splash.
After adjusting the trigger settings (sensitivity, Threshold,
crosstalk, curve, rim sensitivity, splash sensitivity), you can
save them into memory. In UTILITY menu, press the [SAVE]
button to store all pad settings.
If you turn off the power without saving, you will lose the
trigger setting changes you have just made.
These parameters affect all kits.
UTILITY
TEMPO
BEAT
UTILITY
UTILITY
TEMPO
BEAT
UTILITY
Note:
Auto Power Off
Press the [PAGE] or [UTILITY] button to select the Auto Power
Off setup page.
The LCD will display
030 and 060:
If there aren't any operations for about 30 or 60 minutes except
during playing song or metronome, record, MIDI in via USB
port from computer and strike pads, the module will turn the
power off automatically.
"OFF": Switch off the auto power off function.
UTILITY
UTILITY
TEMPO
BEAT
UTILITY
TEMPO
BEAT
C
M
Y
CM
MY
CY
CMY
K
KMC_KIT_2_Manual_G09_120903.ai 18 2012/9/4 13:32:07KMC_KIT_2_Manual_G09_120903.ai 18 2012/9/4 13:32:07