EasyManua.ls Logo

Katadyn PowerSurvivor 40E - Product Specifications

Katadyn PowerSurvivor 40E
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Product Specifications
Power Requirements: 4 amps @ 12 VDC; 3 amps @ 24 VDC*
Construction: 316 Stainless Steel Pump Housing
Rate of Water Production: 1.5 U.S. gal./hr. (5.6 liters/hr.)
±15% @ 13.8 VDC
Feed Water Flow Rate: 15 U.S. gal./hr. (56 liters/hr.)
Pump Weight: 25 lbs. (11.3 kg.)
Pump Height: 6" (15.2 cm.)
Pump Length: 17.5" (44.5 cm.)
Pump Width: 16" (40.5 cm.)
Prefilter Housing Dimensions: 12" x 6" (30 cm. x 15 cm.)
* The electric current requirement is an average figure. Instantaneous current will vary during a
complete cycle of the pump. Also, upon initial installation, you may experience modestly higher
current draw. Within a matter of hours, the average current draw should settle at the above
specification.