What to do if my Kawai Musical Instrument software doesn't respond to key presses?
Make sure that a USB MIDI driver is installed on your computer. Also, check that “USB Audio Device” or “KAWAI USB MIDI” is selected in the software’s input/output device settings. Finally, confirm that the instrument is not connected to a smart device using Bluetooth MIDI.
What to do if my Kawai Musical Instrument does not turn on?
Ensure that the power cable is firmly attached to the instrument and properly connected to a functioning AC outlet.
Why does my Kawai Novus NV10S turn itself off?
The “Auto Power Off” function might be enabled. Check this setting and disable it if you prefer the instrument to remain on.
What to do if my Kawai Novus NV10S Musical Instrument produces no sound?
Here are a few things to check: * Ensure the MASTER VOLUME knob is not at its lowest setting. * Make sure no headphones (or headphone adaptor plug) are connected to the PHONES jacks. * Verify that the “Local Control” setting in the MIDI menu is set to On.
What to do if the sound distorts when playing my Kawai Novus NV10S Musical Instrument at loud volumes?
Check the position of the MASTER VOLUME knob. If you hear excessive distortion, reduce the volume to a more appropriate level.
Why is the volume too low or distorted from the device connected to the Line In jacks of my Kawai Novus NV10S Musical Instrument?
Check the position of the Line In LEVEL knob located on the jack panel and adjust it as needed to achieve the desired volume level.
What to do if my Kawai Novus NV10S pedals are unreliable?
Check that the pedal cable is firmly connected to the instrument to ensure proper functionality.
Why does the pedal board of my Kawai Novus NV10S Musical Instrument flex when depressing a pedal?
Ensure that the pedal support bolt is fully extended to provide stability to the pedal board.
How to fix low headphone volume on my Kawai Musical Instrument?
If your headphones' “Nominal Impedance” is less than 100 ? (ohms), adjust the “Headphone Volume” setting in the Speaker/Headphone menu to High.
What to do if the headphone output of my Kawai Novus NV10S sounds strange?
Check that the “Spatial Headphone Sound” and “Headphone Type” settings are both set to “Normal” to ensure proper audio output.
General| Brand | Kawai |
|---|---|
| Model | Novus NV10S |
| Category | Musical Instrument |
| Language | English |
To Next Page
