What to do if the SOUND/SETUP setting on my Kawai MP7SE is not stored correctly on a USB device?
Ensure that the desired SOUND/SETUP setting has first been stored to internal memory before being saved to a USB memory device.
How to fix a Kawai Musical Instrument that does not turn on?
Check that the AC power adaptor is firmly attached to the instrument, and connected to an AC outlet.
Why does the sound distort when playing my Kawai MP7SE at loud volumes?
Check that the MASTER VOLUME fader is set to an appropriate level, reducing the volume if excessive distortion is heard.
Why does my Kawai MP7SE turn off by itself?
Check that the ‘Auto Power Off’ setting is not enabled.
What to do if there's no sound from some zones on my Kawai MP7SE?
Check that the zone’s ON/OFF button is turned on. Also, verify that the zone is not set to EXT mode, ensuring the red LED above the ON/OFF button (INT) is lit. Confirm that the zone’s VOLUME fader is not at the lowest position and that the zone’s ON/OFF button is not green. Ensure the AMP level parameter in the EDIT menu is not set to 0. Additionally, check that the modulation wheel is not assigned to the ‘Expression’ function. Finally, verify that the Receive Mode parameter in the SYSTEM:MIDI menu is not set to ‘Multi’, and the Receive Channel is not set to MAIN or SUB1~3. If playing separate sections by MIDI or control change is not required, set the Receive Mode parameter to ‘Panel’.
Why does the keyboard on my Kawai Musical Instrument have no touch responsiveness?
Check that the Touch Curve parameter in the EDIT menu is not set to Off. Also, confirm that the Dynamics parameter in the EDIT menu is not set to Off, as this disables touch response. Ensure that the Trigger Mode parameter in the EDIT menu is not set to Fast. Note that some synth sounds like SynthBass or SawLead are intentionally designed without touch response; adjust the DCA Touch Depth or DCF Touch Depth parameters to modify this characteristic.
Why can't I hear sound when playing MP3/WAV files on my Kawai Musical Instrument?
Check that the format of the audio file is supported and listed in the ‘Audio Player supported format specifications’ table. Also, check that the audio player volume is not set to 0.
Why does the Modulation Depth Range parameter have no effect on my Kawai MP7SE?
Check that the modulation wheel function is set to ‘Modulation’ in the EDIT menu. If it is not, the Modulation Depth Range parameter will have no effect.
What to do if the foot switch on my Kawai MP7SE Musical Instrument doesn't turn off when released?
Check that the foot switch pedal is a ‘Normal Closed’ polarity type. If using a ‘Normal Open’ polarity type, please set the FSW Polarity setting in the SYSTEM:Pedal/Mod. menu to Reverse.
Why is my expression pedal not working with my Kawai MP7SE Musical Instrument?
Please check that the expression pedal’s TRS connector type is set correctly, using the EXP TYPE switch on the rear jack pack.
General| Polyphony | 256 notes |
|---|---|
| Keyboard | 88 keys |
| Sound Source | Harmonic Imaging |
| Internal Sounds | 256 |
| Effects | Reverb, Chorus, Delay, EQ, Amp Simulator |
| Display | 128 x 64 pixel |
| Connectivity | MIDI In/Out/Thru, USB to Host, USB to Device, Line In, Line Out, Headphones, Pedal inputs |
| Recorder | 10 song |
| Touch Sensitivity | Light, Normal, Heavy, Off |
| Speakers | None (designed for use with external amplification or headphones) |
| Included Accessories | Power cable, Music rest, F-10H damper pedal |
Explains safety symbols and lists essential usage precautions.
Details the key features and functionalities of the Kawai MP7SE stage piano.
Explains conventions used in the manual for clarity and understanding.
Covers initial setup, turning on the instrument, and selecting sounds.
Explains zone setup, modes, and key range configuration.
Details reverb, EFX, and amp simulator settings for sound modification.
Adjusts parameters for internal sounds across various categories.
Adjusts parameters for controlling external MIDI devices.
Combines INT and EXT mode parameters for comprehensive control.
Procedures for saving individual sounds and panel configurations.
Saves the current state as the default power-on configuration.
Details recorder characteristics and basic ON/OFF operations.
Instructions for recording, playing, and managing internal songs.
Guide for recording and playing audio files via USB.
Introduces USB menu functions and supported data formats.
Procedures for loading and saving data to/from USB devices.
Operations for managing files on USB devices, including deletion and formatting.
Details the organization and categories of system settings.
Covers tuning, effects mode, fader actions, and pedal configurations.
Configuration for MIDI communication and custom sound parameters.
Procedures for resetting sounds, setups, and system parameters.
Provides solutions for power, sound, and controller related problems.
To Next Page
