Kawai MP7SE - Pedal;Mod; Left Pedal Mode

108
SYSTEM Menu
SYSTEM Menu Parameters & Functions
2 Pedal/Mod.
1. Damper Pedal Mode
5 functions
This parameter determines the global operation for the included
F-10H damper pedal.
* The default setting is Normal.
2. Half Pedal Adjust value: 1 ~ 10
This parameter adjusts the point at which the damper/sustain
pedal becomes eective (i.e. when the dampers of the piano
begin to lift from the strings).
This parameter may be useful for pianists that habitually rest their
right foot on the damper/sustain pedal, but do not necessarily wish
to sustain the sound.
* The default setting is 5.
3. FSW Pedal Mode
5 functions
This parameter determines the global operation for the
footswitch (FSW) pedal.
* The default setting is Normal.
4. FSW Pedal Polarity normal, reverse
This parameter changes the polarity of the ordinary footswitch
(FSW) pedal.
The MP7SE’s foot switch terminal is designed for use with ‘Normal
Close’ polarity pedals. If using a foot switch with ‘Normal Open’
polarity, please change this parameter to Reverse.
* The default setting is Normal.
5. Modulation Wheel Curve normal, slow, fast
This parameter changes the output level curve for the
modulation wheel, providing additional control over the speed
of modulation wheel controlled eects.
* The default setting is Normal.
6. EXP Pedal Curve normal, slow, fast
This parameter changes the output level curve for the
connected expression (EXP) pedal, providing additional control
over the speed of expression pedal controlled eects.
* The default setting is Normal.
Output Level
Pedal/Wheel Position
Normal curve
Output Level
Pedal/Wheel Position
Slow curve
Output Level
Pedal/Wheel Position
Fast curve
7. Right Pedal Mode 5 functions
This parameter determines the global operation for the right
pedal of the optional GFP-3 pedal unit.
* The default setting is Normal.
8. Center Pedal Mode 5 functions
This parameter determines the global operation for the centre
pedal of the optional GFP-3 pedal unit.
* The default setting is Normal.
9. Left Pedal Mode 5 functions
This parameter determines the global operation for an ordinary
foot switch pedal or the left pedal of the optional GFP-3 pedal
unit.
* The default setting is Normal.

Pedal modes
Mode Description
Normal The pedal will use the assigned EDIT menu function.
Setup+ The pedal will select the next SETUP memory.
Setup- The pedal will select the previous SETUP memory.
Playback The pedal will start/stop song playback.
Metro. The pedal will start/stop the metronome.