Kawai MP7SE - Expression Pedal

61
EDIT Menu
EDIT Menu parameters (EXT mode)
11. Expression Pedal on, reverse, off
This parameter determines whether or not the expression pedal
(if connected) is active for the selected zone.
When set to ‘Reverse’, the pedal’s output values will be inverted.
* For more information about connecting pedals, please refer to page 17.
12. Expression Pedal Assign
cc#0 ~ cc#119,
aftertoucH
This parameter selects the function assigned to the expression
pedal (if connected).
* This parameter is common for all four zones.
13. Right Pedal
on, off
This parameter determines whether or not the right pedal of
the optional GFP-3 pedal unit is active for the selected zone.
* For more information about connecting pedals, please refer to page 17.
14. Right Pedal Assign
cc#0 ~ cc#119,
aftertoucH
This parameter selects the function assigned to the right pedal
of the optional GFP-3 pedal unit.
* This parameter is common for all four zones.
15. Center Pedal on, off
This parameter determines whether or not the centre pedal of
the optional GFP-3 pedal unit is active for the selected zone.
* For more information about connecting pedals, please refer to page 17.
16. Center Pedal Assign
cc#0 ~ cc#119,
aftertoucH
This parameter selects the function assigned to the centre pedal
of the optional GFP-3 pedal unit.
* This parameter is common for all four zones.
17. Left Pedal on, off
This parameter determines whether or not the left pedal of the
optional GFP-3 pedal unit is active for the selected zone.
* For more information about connecting pedals, please refer to page 17.
18. Left Pedal Assign
cc#0 ~ cc#119,
aftertoucH
This parameter selects the function assigned to the left pedal of
the optional GFP-3 pedal unit.
* This parameter is common for all four zones.