SPECIFICATIONS
Engine Type Forced air cooled 4-stroke,
horizontal shaft,
OHV gasoline engine
Number of Cylinder 1
Bore x Stroke 83 x 65mm ( 3.27 x 2.56in. )
Piston Displacement 351cm
3
( 21.4cu.in. )
Compression Ratio 8.4 : 1
Maximum Power 8.6kW ( 11.5Hp ) / 3600rpm
Maximum Torque 23.5N-m ( 17.4ft.lbs ) / 2500rpm
Direction of Rotation Counter-clockwise facing the
PTO shaft
Fast Idle Speed 4000rpm
Slow Idle Speed 1300rpm
Fuel Unleaded gasoline
Fuel Tank Capacity 6.4litre ( 6.8US.qt. )
Min. Fuel
322gr / kW-hr ( 240gr / Hp-hr )
Consumption Ratio
Oil Gasoline engine oil SAE10W-30
Oil Capacity 1.3litre ( 1.4US.qt. ) with Filter
Carburetor Float type with fixed main jet
*Anti-dust & anti-corrosion type
Balancing Reciprocating balancer
Ignition Flywheel magneto transistor type
Plug NGK BP5ES
*RFI plug is also available
Starter Recoil starter with
Automatic Compression Release
*Electric starter is also available
Governor Mechanical governor
Lubrication Full pressure lubrication
with spin-on oil filter & low oil
shut-off system
Air Cleaner Dual element
Muffler Low tone type
*Adjustable deflector is also
available
Lighting Coil *6V-15W or 12V-25W is also
available
Charging Coil *2A, 4A or 13A is also available
Valve Adjuster Hydraulic Lash Adjuster
**Dry Weight 34.0kg ( 75.0Ibs )
**Dimension 378 x 422 x 454mm
( L x W x H ) ( 14.88 x 16.61 x 17.87in. )
FE350G 2 : 1 Cam Gear Reduction
Specifications subject to change without notice.
Note : ** Recoil starter and metric straight PTO Shaft.
PERFORMANCE CURVES
OVER HEAD VALVE
FULL PRESSURE LUBRICATION
HYDRAULIC LASH ADJUSTER
CAST - IRON CYLINDER LINER
RECIPROCATING BALANCER
To Next Page
Need help?
General
