To Next PageTo Next Page
Need help?Do you have a question about the Kawasaki FX921V and is the answer not in the manual?
Explains WARNING, CAUTION, and NOTE symbols for safe operation.
Key warnings for safe engine operation, including fire hazards and electrical safety.
Information on fuel, emission control systems, and compliance.
Recommended modifications for engines operated at high altitudes.
Federal regulations against altering emission control parts.
Identifies the location of safety warning and maintenance labels on the engine.
Diagrams and labels for locating key engine components.
Engine serial number importance and tune-up specifications.
Specifies the oil capacity for FX921V and FX1000V models.
Guidelines on using unleaded gasoline, octane rating, and oxygenated fuels.
Chart for selecting engine oil viscosity based on ambient temperature.
Safety precautions and steps for adding fuel to the engine.
Procedure for checking and topping up engine oil before use.
Step-by-step guide to starting the engine, including choke operation.
Important cautions and procedures related to the starting system.
Steps to warm up the engine before applying load.
Maximum permissible angles for continuous engine operation.
Procedures for both ordinary and emergency engine shutdown.
Instructions for installing and adjusting the throttle cable.
Instructions for installing and adjusting the choke cable.
Guidance on engine speed adjustments and limitations.
A schedule detailing maintenance tasks and their intervals.
Procedure for checking engine oil level daily.
Procedure for cleaning oil cooler fins every 100 hours.
Steps for changing the engine oil every 100 hours.
Procedure for changing the oil filter every 200 hours.
Maintenance guidelines for the air cleaner system.
Servicing the fuel filter and fuel pump.
Cleaning, checking, and replacing spark plugs.
Instructions for cleaning the engine's cooling system.
Steps to drain the fuel system before long-term storage.
Final steps for preparing the engine for storage.
Troubleshooting for common engine starting and low power problems.
Diagnosing and resolving problems with spark, overheating, and engine speed.
Guidance on environmentally responsible disposal of used parts.
Detailed technical specifications for the FX921V and FX1000V engines.
Electrical diagram for the engine's charging system.
Explains WARNING, CAUTION, and NOTE symbols for safe operation.
Key warnings for safe engine operation, including fire hazards and electrical safety.
Information on fuel, emission control systems, and compliance.
Recommended modifications for engines operated at high altitudes.
Federal regulations against altering emission control parts.
Identifies the location of safety warning and maintenance labels on the engine.
Diagrams and labels for locating key engine components.
Engine serial number importance and tune-up specifications.
Specifies the oil capacity for FX921V and FX1000V models.
Guidelines on using unleaded gasoline, octane rating, and oxygenated fuels.
Chart for selecting engine oil viscosity based on ambient temperature.
Safety precautions and steps for adding fuel to the engine.
Procedure for checking and topping up engine oil before use.
Step-by-step guide to starting the engine, including choke operation.
Important cautions and procedures related to the starting system.
Steps to warm up the engine before applying load.
Maximum permissible angles for continuous engine operation.
Procedures for both ordinary and emergency engine shutdown.
Instructions for installing and adjusting the throttle cable.
Instructions for installing and adjusting the choke cable.
Guidance on engine speed adjustments and limitations.
A schedule detailing maintenance tasks and their intervals.
Procedure for checking engine oil level daily.
Procedure for cleaning oil cooler fins every 100 hours.
Steps for changing the engine oil every 100 hours.
Procedure for changing the oil filter every 200 hours.
Maintenance guidelines for the air cleaner system.
Servicing the fuel filter and fuel pump.
Cleaning, checking, and replacing spark plugs.
Instructions for cleaning the engine's cooling system.
Steps to drain the fuel system before long-term storage.
Final steps for preparing the engine for storage.
Troubleshooting for common engine starting and low power problems.
Diagnosing and resolving problems with spark, overheating, and engine speed.
Guidance on environmentally responsible disposal of used parts.
Detailed technical specifications for the FX921V and FX1000V engines.
Electrical diagram for the engine's charging system.
General| Compression Ratio | 8.2:1 |
|---|---|
| Cooling System | Air-cooled |
| Fuel System | Carburetor |
| Starter System | Electric |
| Engine Type | 4-stroke, V-twin, OHV |
| Ignition System | Magneto with transistor |
