kbice FDFM1JA02 - Ice Making Controls; Cleaning Functionality; Water and Power Indicators; First Time Use Procedures

7
24412 Main St. Suite 105, Carson, CA 90745
Make Ice Button
Making Ice LED
It will be disabled when the unit is in the cleaning mode.
The LED illuminates while the unit is currently in the making ice mode.
x Press the button once to start making ice, the Making Ice LED illuminates.
The unit will automatically stops making ice when the ice bin is full.
x Press and hold the button for 3 seconds to stop making ice, the Making Ice
LED goes off.
Clean Button
Cleaning LED
It will be disabled when the unit is in the making ice mode.
It can be used for defrosting, flushing, descaling or sanitizing process.
The LED flashes quickly once cleaning is needed.
The LED illuminates while the unit is currently in the cleaning mode.
x Press and hold the button for 3 seconds to start cleaning, the Cleaning LED
illuminates.
x Press and hold the button for 3 seconds again to stop cleaning, the
Cleaning LED goes off.
Add Water LED
It illuminates when more water is needed.
It flashes quickly with 5 beeps and then goes off once the water reservoir is
full.
Power LED
It illuminates when the unit is plugged into power.
NOTE
The unit does not dispense ice while the Cleaning LED illuminates.
First time use
NOTE
For the first time use flush the unit following instructions below.
For the first time use dispense several cups of ice and then discard
them.