V1.00
multisys D2-MSMT
20742_EDEBDA0231-2516-1_EN
5
Introduction
1.2 Explanation of safety relevant symbols
These operating instructions contain notes that must be observed for your
personal safety and to avoid damage to equipment. These notes are identied
by a warning sign or information symbol, depending on the degree of hazard
they represent.
Warning
"Warning" means that death, major injuries or damage may occur if suitable
safety precautions are not taken.
Caution
"Caution" means that minor injuries or damage may occur if suitable safety
precautions are not taken.
Note
"Note" is an important piece of information on the product, its operation or the
respective part of the operating instructions to which special reference is being
made.
Disclaimer
The contents of these operating instructions have been carefully reviewed in
terms of the hardware and software described. Nonetheless, deviations cannot
be ruled out, and the manufacturer cannot guarantee 100% conformity. The
specications made in these operating instructions are reviewed on a regular
basis; any corrections required will be included in the next revision.
To Next Page
Loading...