KC-P30 x-series System overview
Configuration manual V4.09
12
© KEBA
2.1.3 WLAN Access Point (Hotspot) (optional)
P30 x-series can be connected to a mobile device via the integrated WLAN
access point. With the mobile device, the web interface can be easily ac-
cessed and the configuration of the charging station can be performed.
1 ... P30 x-series
The access data and the IP address of the WLAN access point are listed on
the configuration label. The configuration label is in a pouch which is en-
closed with the mounting material.
The following steps are necessary to perform the configuration via a mobile
device:
1) Connect a mobile device to the WLAN access point.
2) Access the IP address of the WLAN access point in a web browser on
the mobile device.
3) Perform configuration via the web interface, see 4 Web interface.
2.1.4 Mobile communications (optional)
Certain device variants have a mobile communications interface. P30 x-se-
ries with mobile communications can connect to an OCPP backend over the
cellular network. The mobile communications provider may charge additional
fees (depending on the tariff) for running data transmissions.
1 ... P30 x-series 2 ... OCPP backend
To Next Page
Loading...
