Keba KeContact X Series User Manual

KC-P30 x-series System overview
Configuration manual V4.09
9
© KEBA
2 System overview
With P30 x-series, several charging stations can be interconnected in the
form of a master/slave network. This makes charging with an intelligent load
management possible. In addition, a connection to a higher-level OCPP
backend can take place. The charging station is equipped with different net-
work interfaces for these functions.
Fig.2-2: Example network setup
1 ... Local charging network 2 ... Router/Switch
3 ... Master charging station (x-series) 4 ... Slave charging station (c-series)
5 ... Higher-level network/Internet 6 ... OCPP backend
Only P30 x-series, can be operated as master charging stations; only P20/
P30 c-series can be operated as slave charging stations.
The following chapters describe which network interfaces P30 x-series (mas-
ter charging station) provides and how to set up a master/slave network.
2.1 Network interfaces
P30 x-series provides the following network interfaces (e.g. for connection to
an OCPP backend, ...):
● LAN
● WLAN (optional)
● WLAN access point (optional)
● Mobile communications (optional)
Slave charging stations can only be connected via LAN to P30 x-series
(master charging station).

Keba KeContact X Series Specifications

General

Charging power	Up to 22 kW
Protection degree	IP54
Voltage	400 V AC
Connector type	Type 2
Communication	Ethernet
Charging current	6 - 32 A (configurable)