EasyManua.ls Logo

Keba KeContact X Series - Username and Password Policy

Keba KeContact X Series
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KC-P30 x-series Web interface
Configuration manual V4.09
28
© KEBA
The web interface username and the corresponding password can be
changed here. The following rules apply for assigning the password:
At least 10 characters long
Maximum of 2 successive identical characters
At least 3 of the following criteria are fulfilled:
− 1 uppercase letter (A−Z)
− 1 lowercase letter (a−z)
− 1 number (0−9)
− 1 special character
Remote Service Interface
The remote access to the charging station can be enabled here. This en-
ables a service technician to access the charging station via an encrypted
connection. These settings can also be configured on the OCPP backend.
Log Level
For error diagnosis, it can be necessary to record the operations of the
charging station in detail. This can be enabled in this area of the DEBUG
mode. To ensure that the recorded data quantity is not too large, the dura-
tion for the detailed recording must also be specified.
Recovery Key
If you forget the web interface password, you can reset it using the displayed
recovery key. The recovery key is also displayed here, which can also be
found on the configuration label.
Information
The recovery key absolutely must be kept in a safe place for the entire life
of the product!

Related product manuals