Handheld Terminal Display
User's Manual, Version: 1.3 51
© KEBA 2007
Touch stylus attached to the left or right of the KeTop
Touc screen re-calibration
The touch screen is already calibrated when the KeTop is delivered. No fur-
ther calibration is required.
If a re-calibration is required for any reason (humidity of air, temperature,
etc.), perform the calibration procedure under Windows CE as follows:
Start -> Settings -> Control Panel -> Stylus -> Calibration -> Recalibrate
For the calibration you can also use the ConifgTool. See chapter Display
and Touch
Screen Settings on page
95.
To Next Page
Loading...