●「SETUP」Mode
In the SETUP mode you can check and change the settings of the cam with the help of built-in LCD. Moving the power
switch to the SETUP position will turn on the LCD display and you will see an information screen.
Operational Modes
The cam has three basic operational modes: 「OFF」, 「ON」 and 「SETUP」
●「OFF 」Mode
When cam in OFF mode, you can do the following:
• replacing the SD card or batteries
• connecting cam with other device by USB port
It will occur a little of power consumption under OFF mode. If you won't use it for a long time, please take batteries off.
●「ON」Mode
Once in ON mode no manual controls are needed or possible (the control keys have no effect). The cam will take photos or
videos automatically (according to its current parameter settings) when it is triggered by the PIR sensor′s detection of
activity in the area it covers.
T
T
3M
720P
0000/0888
Camera Mode
Time Stamp ON
Time Scan ON
SD Card
Battery Level
Video Mode
Image Resolution
of Photos Taken
Audio Rec ON
Video Resolution
Available Video
Recording Time
KEEPTIME
To Next Page
Loading...
