Settings
Camera Name
Interval
Coordinate Input
Set
Exit
Camera Name
OK
Input
MENU
Set
Exit
Interval
OK
MENU
Allows the user to set a custom name for the camera. Useful
for ID purposes when multiple cameras are setup, since each
camera will imprint its name on all photos (but not videos) it
captures.
Selects the length of time that the camera will “wait”until
it responds to any additional triggers from the PIR after an
animal is first detected and remains within the sensor's range.
During this user set“ignore triggers”interval, the camera
will not capture photos/videos.This prevents the card from
filling up with too many redundant images.
Set
Exit
Coordinate Input
OK
OFF
MENU
ON
Using the Setup Menu Input Screens"Allows user to input
latitude and longitude coordinates for camera's location.This
data will be embedded in files saved on camera’s SD card.
10s
KEEPTIME
To Next Page
Loading...
