Need help?Do you have a question about the KEHUA TECH SPI100K-B and is the answer not in the manual?
Describes safety announcements for operation and maintenance.
Details the step-by-step process for installing the inverter.
Guides on choosing the appropriate location and environment for installation.
Provides instructions for mounting the inverter on brackets or walls.
Details the procedures and safety precautions for connecting electrical wiring.
Lists essential checks to perform before initial inverter startup.
Provides solutions for common faults and error conditions.
General| Max. DC Voltage | 1100 V |
|---|---|
| Start Voltage | 250 V |
| MPPT Voltage Range | 200-1000 V |
| Max. AC Current | 160 A |
| Rated AC Voltage | 400 V |
| Rated Grid Frequency | 50 Hz / 60 Hz |
| Power Factor | >0.99 |
| THDi | <3% |
| MPPT Efficiency | 99.9% |
| DC Switch | Yes |
| DC Over-Voltage Protection | Yes |
| AC Over-Current Protection | Yes |
| AC Short-Circuit Protection | Yes |
| AC Over-Voltage Protection | Yes |
| Ground Fault Monitoring | Yes |
| Grid Monitoring | Yes |
| Anti-Islanding Protection | Yes |
| Protection Degree | IP65 |
| Display | LCD |
| Rated AC Power | 100000 W |
| Max. AC Power | 110000 VA |
| AC Voltage Range | 320 V - 480 V |
| Temperature Range | -25°C to +60°C |
| Cooling | Smart cooling |
| Communication | RS485 |
| Humidity | 0% - 100% |
To Next Page
