Keithley 199

PROGRAM
COMMENTS
Clear screen
Find board descriptor.
Find 199 descriptor.
Set prima,y address to
26.
Set REN true.
Prompt for command
string.
Add <CR> <LF> to
command string.
Send command string
to 199.
Dimension reading input
string.
Get reading string from
199.
Display reading string
on CRT.
2. In order for Translator to function properly, a <CR>
<LF->seq”ence must be added to the end of any
Translator exewtion string sent to the instrument. See
line 65 above for an example
33
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com