PROGRAM
COMMENTS
Set segment address to
C400 hex.
Define call offset*.
Define interface para-
meters.
Set 199 address to 26.
Initialize PC-466.
Prompt for command
string.
Add <CR> to string.
Send command string to
199.
Dimension reading input
string.
Get reading string from
199.
1. To convert from a string to a numeric variable, modify
the program as follows:
188 R=“RL<“IDb<R*r5,12> >
185PRlHTR
2. For use with a card memory~address other than C400,
modify the DEFY SEG statement in line 10 accordingly.
For example, with a card memory address of COOO, line
10 should be modified as follows:
19DEFSEC=&HCOBB
3. In order for Translator to function~properly, a <CR> se-
quence should be added to the end of any string sent
to the Model 19% See the example is line 66 above.
35
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...