Quick Setup options
When you press QUICKSET, the BASIC SOURCE/MEASURE
SETTINGS screen is displayed. From this menu, you can:
Choose the source and measure functions.
Use the Performance slider to select the best balance between
measurement resolution and measurement speed.
Choose from a selection of Quick Setups that automatically make
the settings required for that setup, turn the output on, and begin
making measurements.
When you select a Quick Setup, the instrument turns the output
on. Carefully consider and configure the appropriate output-off
state, source, and limits before connecting the Model 2461 to a
device that can deliver energy, such as other voltage sources,
batteries, capacitors, or solar cells. Configure the settings that
are recommended for the instrument before making connections
to the device. Failure to consider the output-off state, source,
and limits may result in damage to the instrument or to the
device under test (DUT).
To Next Page
Loading...
