High Voltage SourceMeter Instrument User's Manual Section 2: Front-
2470-900-01 Rev. A / May 2019 2-11
Save screen captures to a USB flash drive
You can save a screen capture of the front-panel display to a graphic file. The instrument saves the
graphic file to the USB flash drive in the PNG file format.
To save a screen capture:
1. Insert a USB flash drive in the USB port on the front panel of the instrument.
2. Navigate to the screen you want to capture.
3. Press the HOME and ENTER keys. The instrument displays "Saving screen capture."
4. Release the keys.
To Next Page
Loading...
