Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
www.keithley.com
Specifications are subject to change without notice.
Page 2 of 3 SPEC-2600S Rev. B / September 2007
Series 2600
System SourceMeter
®
Specifications
2. SUPPLEMENTAL INFORMATION
Front Panel Interface:
Two-line vacuum fluorescent display (VFD) with keypad and rotary knob.
Display:
• Show error messages and user-defined messages
• Display source and limit settings
• Show current and voltage measurements
• View measurements stored in non-volatile reading buffers
Keypad operations:
• Change host interface settings
• Save and restore instrument setups
• Load and run factory and user-defined test scripts (i.e., sequences) that prompt for input and send results to the
display
• Store measurements into non-volatile reading buffers
Programming:
Embedded Test Script Processor (TSP) accessible from any host interface. Responds to individual instrument
control commands. Responds to high-speed test scripts comprised of instrument control commands and Test Script
Language (TSL) statements (e.g., branching, looping, math, etc.). Able to execute high-speed test scripts stored in
memory without host intervention.
Minimum memory available: 3Mb (approximately 50,000 lines of TSL code).
Test Script Builder: Integrated development environment for building, running, and managing TSP scripts.
Includes an instrument console for communicating with any TSP-enabled instrument in an interactive manner.
Requires:
• VISA (NI-VISA included on CD)
• Microsoft .NET Framework (included on CD)
• Keithley I/O Layer (included on CD)
• Pentium III 800MHz or faster personal computer
• Microsoft
®
Windows
®
98, NT, 2000, or XP
Software Interface: Direct GPIB/VISA, Read/Write with VB, VC/C++, LabVIEW, TestPoint, LabWindows/CVI,
etc.
To Next Page
Loading...
Need help?
General
