Keithley 2612B - Bit.set(); Bit.setfield()

Section
7: TSP command reference Series 2600B System SourceMeter® Instrument
Reference Manual
7-12 2600BS-901-01 Rev. B / May 2013
Also see
Bit manipulation and logic operations (on page 5-3)
bit.get() (on page 7-10)
bit.set() (on page 7-12)
bit.setfield() (on page 7-12)
bit.set()
This function sets a bit at the specified index position.
Type TSP-Link accessible
Affected by Where saved Default value
Function
No
Usage
result = bit.set(value, index)
result
Result of the bit manipulation
value
Specified number
index
One-based bit position within
value
to set (1 to 32)
Details
This function returns result, which is value with the indexed bit set. The index must be between 1 and 32.
The least significant bit of value is at index position 1; the most significant bit is at index position 32.
Any fractional part of value is truncated to make it an integer.
Example
testResult = bit.set(8, 3)
print(testResult)
The binary equivalent of decimal 8 is 1000. If the bit at
index position 3 is set to 1, the returned value is
decimal 12 (binary 1100).
Output:
1.20000e+01
Also see
Bit manipulation and logic operations (on page 5-3)
bit.clear() (on page 7-10)
bit.get() (on page 7-10)
bit.getfield() (on page 7-11)
bit.setfield() (on page 7-12)
bit.test() (on page 7-13)
bit.toggle() (on page 7-14)
bit.setfield()
This function overwrites a bit field at a specified index position.
Type TSP-Link accessible
Affected by Where saved Default value
Function
No