Keithley 2612B - Errorqueue.clear()

Section
7: TSP command reference Series 2600B System SourceMeter® Instrument
Reference Manual
7-82 2600BS-901-01 Rev. B / May 2013
Example
key = display.waitkey()
print(key)
Pause script executio
n until the operator presses
a key or the navigation wheel , or rotates the
navigation wheel.
If the output is:
8.60000e+01
It indicates that the MEAS(A) key was pressed.
Also see
Capturing key-press codes (on page 3-81)
display.getlastkey() (on page 7-63)
display.sendkey() (on page 7-73)
display.settext() (on page 7-76)
errorqueue.clear()
This function clears all entries out of the error queue.
Type TSP-Link accessible
Affected by Where saved Default value
Function
Yes
Usage
errorqueue.clear()
Details
See the Error queue (on page E-3) topic for additional information about the error queue.
Also see
Error queue (on page E-3)
errorqueue.count (on page 7-83)
errorqueue.next() (on page 7-83)