To set l-limit:
1.
Keep pressing and releasing MENU until the cur-
rently selected i-limit is displayed:
ILIMIT
or
ILIMIT
251rA
2.5mA
2.
Use the rotary knob to display the desired l-limit
value.
3.
to enter the displayed l-limit, press MENU.
Operate
5oov 2mA
MAX
OPERATE
III
0
FLASHES
IN I LIMIT
The OPERATE key toggles the output between standby
and operate. In standby, the V-Source is removed from
the rear panel output terminals. In operate, V-Source is
applied to the output terminals.
17
To Next Page
Loading...
