C. Again press the RECALL button and release it when LO is
displayed. Note the minimum reading.
D. Exit from the recall mode by pressing the SHIFT button and then
the RECALL EXIT button. The DATA indicator light will turn off.
3. Turn off the data store cycle by pressing the ON/OFF button. The in-
dicator light will turn off. The minimum/maximum readings, along
with the other data, will be retained until a new store cycle is started.
NOTE
There must be at least one reading in data store in order
to recall the minimum/maximum values.
TYPICAL USE
Detect surges, dips and peak drifts over a period of time.
25
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com