EOI: KO = Send EOI and hold off on “X”.
Kl = Do not send EOI and hold off on
\
“X
K2 = Send EOI and no hold off on 9”.
K3 = Do not send EOI and no hold off on
‘X”.
Ym = One terminator character.
Ymn = Two terminator characters
X = Execute Device-Dependent Commands
“Use “X” to force a sequence. Example: To
TRIGGER TO FIRST BYTE OUT: 350ms.
POWER UP DEFAULT CONDITIONS
MODE
Function
Range
Zero Check
zero cormct
supprass
Trigger
V-Source Operate
Read Mode
Data Format
Display
Data Store Control
SRQ
EOI
Teninator
V-Source Value
St&US
Cal Value
STATUS (see machine status word)
Fo = Volts
RO = Autorange
Cl = On
M=Off
NO = Off
T6 = Continuous, External
OO=Off
BO = Electrometer
GO = Send prefix with data
W = Electrometer
Q7 = off
MO = Clear SRQ mask
KO = Send EOI and hold off on “X”
YO = CR LF
vo = 0 Volts
U not active
A not active
37
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
