5
Delta, Pulse Delta, and
Differential Conductance
Section 5 topics
Operation overview, page 5-2 Delta, page 5-13
Model 622x measurement process, page 5-13
Test systems, page 5-4 Configuration settings, page 5-15
Keithley instrumentation requirements, page 5-4 Operation, page 5-16
System configurations, page 5-4 Setup and arm commands, page 5-19
System connections, page 5-5
DUT test connections, page 5-8 Pulse Delta, page 5-21
Configuring communications, page 5-9 Model 6221 measurement process, page 5-21
Triggering sequence, page 5-10 Pulse Delta outputs, page 5-22
Configuration settings, page 5-26
Readings, page 5-11 Operation, page 5-29
Display readings, page 5-11 Setup commands, page 5-32
Measurement units, page 5-11
Read commands, page 5-13 Differential Conductance, page 5-34
Model 622x measurement process, page 5-34
Configuration settings, page 5-37
Operation, page 5-38
Setup and arm commands, page 5-41
NOTE The information in this section is an abbreviated version of
the information in Section 5 of the Reference Manual. Refer to
Section 5 of the Reference Manual for complete details and
additional information that is not provided in this manual.
To Next Page
Loading...