6
Averaging Filter, Math, and Buffer
Section 6 topics
Averaging filter, page 6-2
Averaging filter characteristics, page 6-2
Filter setup and control, page 6-4
Remote programming – Averaging filter, page 6-4
Math, page 6-7
mX+b and m/X+b (reciprocal), page 6-5
Configuring mX+b and m/X+b, page 6-6
Remote programming – Math, page 6-6
Buffer, page 6-7
Buffer characteristics, page 6-7
Storing readings, page 6-8
Recall, page 6-8
NOTE This section only applies to a Model 622x that is being
used with a Model 2182/2182A to perform Delta, Pulse
Delta, or Differential Conductance measurements.
NOTE The information in this section is an abbreviated version
of the information in Section 6 of the Reference Manual.
Refer to Section 6 of the Reference Manual for complete
details and additional information that is not provided in
this manual.
To Next Page
Loading...