Section 1: Introduction to S530 Diagnostics S530 Diagnostic Manual
Figure 12: CVU diagnostics
Detailed diagnostic results
In addition to the ACS GUI log window, separate diagnostics reports (*.csv) and log (*.log) files are
saved in the following default directory (see next Figure):
C:\ACS\Projects\Diagnostic\Reports
To find the correct files, you need to know the type of test, as well as the date and time of the
diagnostic test. Each type of test has a separate diagnostic report. For example, the results of the
Diag_SMU test are contained in one report file, while the Diag_Matrix test results are in a different
file. All of the diagnostic reports will be located in the default directory.
NOTE
You also can upload the files to an ftp server by selecting and using the UploadToFTP PTM (see next
Figure).
Figure 13: Diagnostic results
1-14 S530-906-01 Rev. A / March 2011
To Next Page
Loading...
