Keithley Series 2600 User Manual

A-81
APPENDIX A
Scripts
smub.source.rangev = l_sourcev --Set output level
smua.source.limiti = l_cmpl --Set compliance level
smub.source.limiti = l_cmpl --Set compliance level
smua.measure.nplc = 1 --Set measurement aperture
smub.measure.nplc = 1 --Set measurement aperture
smua.measure.autozero = smua.AUTOZERO_AUTO --Set Autozero mode
smub.measure.autozero = smub.AUTOZERO_AUTO --Set Autozero mode
-- Setup SMUA buffer to store all the result(s) in and start testing.
smua.nvbuffer1.clear() --Clear Nonvolatile buffer
smua.nvbuffer1.appendmode = 0 --Append buffer? 0 = No, 1 = Yes
smua.nvbuffer1.collecttimestamps = 0 --Collect Timestamps? 0 = No, 1 = Yes
smua.nvbuffer1.collectsourcevalues = 0 --Collect Source Values? 0 = No, 1 = Yes
smua.source.output = smua.OUTPUT_ON --Enable outputs
smub.source.output = smua.OUTPUT_ON --Enable outputs
smua.source.levelv = l_sourcev -- Program source to level.
smub.source.levelv = l_sourcev -- Program source to level.
smua.measure.count = l_points --Number of points to collect
smua.measure.i(smua.nvbuffer1) -- Measure current and store in reading buffer.
smua.source.output = smua.OUTPUT_OFF
smub.source.output = smub.OUTPUT_OFF
-- Update the front panel display and restore modified settings.
smua.source.levelv = 0
smub.source.levelv = 0
printbuffer(1,l_points,smua.nvbuffer1)
end --function RunHighVoltage(sourcev, points)
--RunHighVoltage(40, 10)

Keithley Series 2600 Specifications

General

Model	Series 2600
Measurement Functions	Voltage, Current, Resistance, Power
Resolution	Up to 6.5 digits
Current Source Range	Up to 10A
Communication Interfaces	GPIB, USB
Applications	Semiconductor testing
Category	Source Measure Unit (SMU)
Channels	Single or Dual Channel (varies by model)