www.kelichina.com Page 2 of 38
Contents
Chapter 1 Brief Introduction
1. Basic Operating Principle of Digital Load Cell
2. Principle of Digital Indicator
3. Features and characteristics
4. Digital Load Cell and Indicator communication format
Chapter 2 Technical Specification
1. Digital Load Cell Technical Guide Line
2. Technical Guide line of Weight Display
Chapter 3 Installation & Connection
1. Front & Back view of Indicator
2. Connection between Load cell and Indicator
3. Connection between Printer and Indicator
4. Connection between Display Screen and Indictor
5. Serial interface
Chapter 4 Look over INS (internal statement number) of load cell
Chapter 5 Corner Adjustment
1. Manual Corner Adjustment
2. Automatic Corner Adjustment
Chapter 6 Calibration
Chapter 7 Adjust the address of load cell
Chapter 8 Setting of Scale’s Linearity Adjustment
Chapter 9 Installation & Debugging
1. Installation of Scale platform & Load Cell
2. Indicator’s data Setup
3. Platform Installation & Adjustment
4. Four Corner Adjustment
5. Calibration
Chapter 10 Operation
1. Start-up & Automatic-zero setting at start-up
2. Manual Zero setting
3. Tare deduction operation
4. Date & Time Setup and operation
5. Data Record Storage
To Next Page
Loading...
Need help?
General
